Accessibility Tools

Skip to main content
 x 
Cart - $ 0.00
Cart

Your cart is currently empty

4x4

Toyota

TOY-97
Suitable For
A vehicle image representing the page's contents
Type:

Landcruiser

Model:

200 Series (11/2007 to 2021)

Variant:

200 Series - 3" Lift - (UZJ / URJ / GRJ / VDJ 200)

Detail:

Wagon,
3" Front, 1"-2" Rear

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only

Coil Spring

UZJ200 4.7L V8 Petrol
URJ200 5.7L V8 Petrol

VDJ200 4.5L Twin Turbo
V8 Diesel

Shock Absorber

X - Centre of Eye to Spring Seat


X - Centre of Eye to Spring Seat


Bump Stop

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.


Control Arm

Upper Control Arm

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment


Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment


Strut Top Cap

Part Number
SC59-006

Diff Drop Kit

Part Number
DD59-530K

Sway Bar

Part Number
SB59-1928

Coil Spring

Shock Absorber

Part Number
GS59-682
Part Number
IMS59-60682

Requires RM59-037 For Non-KDSS Models


Bump Stop

Hydraulic Bump Stop

Hydraulic Bump Stop Mounting

Control Arm

Upper Control Arm

Lower Control Arm

Panhard Rod

 
Part Number
PR59-1421

Recommended for Lifts Above 35mm to Correct Wheel Alignment.


Sway Bar

Part Number
SB59-1929