Toyota
Hilux
Vigo - N70 (2005 to Mid 2015)
0"-2" Lift - (KUN/GGN 25/26, KZN 35/36)
4x4 Single Cab, Extra Cab, Dual Cab,Â
50mm Lift (2")
For a more level look, use 3" lift front suspension components
New product is added into quote successfully.
Coil Spring
* Vehicles Fitted with this Part Number MUST be Fitted with GS59-220 Shock Absorber.
Single Cab
4.0L V6 Petrol
KUN26 3.0L TD
Extra Cab, Dual Cab
GGN25 Petrol
Extra Cab, Dual Cab
KUN26 3.0L TD
Shock Absorber
X - Centre of Eye to Spring Seat
X - Centre of Eye to Spring Seat
Includes Vehicle Specific Bracket.
If Vehicle Specific Bracket Does Not Work, Use RM80-005 Universal Bracket
Shock Absorber Reservoir Mounting
Only For Use With MR59-50220
Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength
Bump Stop
Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.
Control Arm
Upper Control Arm
Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment
Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment
Strut Top Cap
Strut Spacer
Maximum 1 Per Shock.
Requires Diff Drop Kit If Fitting To IMS or MRA Shock Absorbers
Leaf Spring
It is a Requirement that the Brake Adjuster BA59-002 be Fitted when Using These Leaf Springs
When Using L59-040-R, The Longer Leaf On The 2nd Stage May Be Turned Upside Down To Give A Softer Ride.
This Will Reduce Load Carrying Capacity
When Using L59-041-R, The Longer Leaf On The 2nd Stage May Be Turned Upside Down To Give A Softer Ride.
This Will Reduce Load Carrying Capacity