Accessibility Tools

Skip to main content
 x 
Cart - $ 0.00
Cart

Your cart is currently empty

4x4

Mitsubishi

MITS-68
Suitable For
A vehicle image representing the page's contents
Type:

Triton, L200

Model:

MV (2024 on)

Variant:

3" Lift

Detail:

4x4,
Also Suits 4x2 High-Rider

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only

Coil Spring

Shock Absorber

X - Centre of Eye to Spring Seat


X - Centre of Eye to Spring Seat


Bump Stop

Replaces Original Bump Stop.


Control Arm

Upper Control Arm

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment


Strut Top Cap

Part Number
SC43-016