Accessibility Tools

Skip to main content
 x 
Cart - $ 0.00
Cart

Your cart is currently empty

4x4

Jeep

JEEP-66
Suitable For
A vehicle image representing the page's contents
Type:

Gladiator

Model:

JT (2018 on)

Variant:

Detail:

Pickup
50mm Lift (2")
75mm Lift (3")

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only

Coil Spring

Shock Absorber

Part Number
IMS29-60736

Steering Damper

Bump Stop Extension

 
Part Number
BS29-566

*Required For Clearance of 35" Tyres


Castor Kit

Recommended For 50mm (2") Lift.
Required For 75mm (3") Lift.


Sway Bar Extension

Part Number
SE29-568

Increases Wheel Travel For 50mm (2”) Lift.
Required For 75mm (3”) Lift.


Panhard Rod Bracket

Spring Seat

 
Part Number
PS29-4034

Reduces Coil Spring Bow From Factory Seat


Coil Spacer

Part Number
PS29-4028

Coil Spring

Coils Will Come Loose With IMS29-60743 & MRA29-A743.
Requires Spring Retainers.


Coils Will Come Loose With IMS29-60743 & MRA29-A743.
Requires Spring Retainers.


Part Number
C29-233V

Coils Will Come Loose With IMS29-60743 & MRA29-A743.
Requires Spring Retainers.


Coils Will Come Loose With IMS29-60743 & MRA29-A743.
Requires Spring Retainers.


Shock Absorber

Part Number
IMS29-60743

Bump Stop Extension

Part Number
BS29-577

*Required For Clearance of 35" Tyres


Sway Bar Extension

 
Part Number
SE29-575

Increases Wheel Travel For 50mm (2”) Lift.
Required For 75mm (3”) Lift.


Coil Spacer

Part Number
PS29-4029